background image

 

IPTV EPG-Server

 

EN 

4

 

 

Install the unit in a dry location without infiltration or condensation of water. In case of the formation of 
condensation wait until the system is completely dried. 

 

Do not expose it to dripping or splashing. 

 

If any liquid should accidentally fall into the cabinet, disconnect the power plug. 

 

Install the head-end station where it is protected from direct exposure to sunlight 

 

Install the head-end station not within the immediate vicinity of heat sources 

 

Do not install the head end in cabinets or recesses which are not ventilated. 

 

Do not place any vessels containing liquids on the head-end station. 

 

Do not place anything on the head-end station which could initiate fires. 

 

 

To avoid any risk of overheating

 

 

Install the unit in a well aired location and keep a minimum distance around the apparatus for sufficient 
ventilation 

 

Do not place anything on the unit that might cover the ventilation holes. 

 

Do not install the product in a dusty place  

 

Use the apparatus only in moderate climates (not in tropical climates) 

 

Respect the minimum and maximum temperature specifications 

 

Ensure that the headend station is adequately ventilated. 

 

 

To avoid any risk of electrical shocks

 

 

Controller must be correctly grounded according to applicable national regulations.  

 

For a complete disconnection from the mains, the mains plug must be pulled out of the mains socket. Ensure 
that the mains plug can be pulled out without difficulties. 

 

Pull out power plug when making connections of cables.  

 

To avoid electrical shock, do not open the housing. 

 

 

To avoid interferences with LTE services in Europe

 

 

Do not select a channel higher than UHF 48 in countries with LTE II / 700 operation 

 

Do not select a channel higher than UHF 60 in countries with LTE I / 800 operation 

 

Use coaxial cables with screening effectiveness of >85dB (Class A) at least or >95dB (Class A+) 

 

 

WEEE disposal

 

Electronic devices should never be disposed of in the household rubbish. In accordance with directive 
2002/96/EC of the European Parliament and the European Council from January 27, 2003 which 
addresses old electronic and electrical devices, such devices must be disposed of at a designated 
collection facility. At the end of its service life, please take your device to one of these public collection 
facilities for proper disposal. 

 

 

 

Содержание 492095



















Отзывы: