![background image](http://html1.mh-extra.com/html/triax/492095/492095_user-manual_1160924011.webp)
IPTV EPG-Server
11
EN
To update the IPTV EPG Server, click select file and in the dialog box, select the image file you received from Triax
A/S. Select Open and return to the Software Upgrade page. The click the Upgrade button and wait for the IPTV EPG
Server to restart.
5.4.3
How to change from SINC to REACH XML format
If changes are done, please make sure to update both the EPG Server and the TRIAX Transfer Service.
Changes at the EPG Servers GUI:
It will by default be supported only for SINC XML format and if the user wants to change the XML format to be
comparable for his new REACH Server, then it is only needed to change the “Samsung API Path”.
The Settings link takes you to the settings menu.
The default value here is “/samsungEvents” and to change it
to the comparable Samsung REACH XML format, just
change the value to “/samsungEventsReach” and click the Apply button.
It should be applied right away and no need to restart.
Changes at the EPG Transfer Service GUI:
When changing the “Samsung API Path” at
the EPG Servers GUI, it is needed to change it as well in the “Triax EPG
Transfer Service” that should be located on the same system as the Samsung SINC/REACH Server.
The GUI looks like shown below:
You need to change the parameters, press the stop button and then the config button.
In the Configuration window, it is possible to change:
•
The IP address of the EPG Server
•
The destination folder for the Samsung_epg.xml file for the SINC server. The location must always be
“<SINC/REACH Server install director
y>\htdocs\data\
epgxml”
•
The destination filename. This is required to be Samsung_epg.xml by the SINC server
•
The refresh time for the application. The default is 5 min, but if desired this can be anywhere between 2 and
65537 minutes (default 5 minutes)
Chan
ge the “EPG Source URL” to the “Samsung API Path” that you entered earlier
-
change from “/samsungEvents” to “/samsungEventsReach”