manualshive.com logo in svg

TRIATEK FMS-2000M, Руководство пользователя, Страница: 23 / 27

Поделиться
Скачать
TRIATEK FMS-2000M Скачать руководство пользователя страница 23

FMS-2000M

LIT-12013580

23

Alarm mode

Display response

Audible

Screen color and action icon change to red, 360° Safety Halo flashes red, audible alarm sounds

Mute

Screen color and action icon change to red, 360° Safety Halo flashes red, audible alarm is mute

Night

Screen color and action icon stay the same brightness, 360° Safety Halo dims if enabled in the Safety Halo setup, 

audible alarm is mute

Note: 

The display responses for night mode occur during the timeframe specified in the night mode settings.

Table 9: Alarm modes

Setting the audible alarm delay

Set up a delay for the audible alarm to reduce nuisance alarms when you open the door. With the audible alarm delay, the screen and 

the 360° Safety Halo flash red but the alarm does not sound for the period of time that you set.

1.  On the home screen, tap the 

User Menu

 icon. 

2.  On the user menu screen, tap 

Alarm

.

3.  On the alarm screen, tap the 

Audible Alarm Delay

 arrow.

4.  To adjust the alarm delay period up to 60 seconds, move the slider. 

5. 

To confirm the new settings, tap the 

Checkmark

 icon.

Changing the audible alarm snooze

The audible alarm snooze temporarily mutes the alarm by the duration you specify. To snooze the audible alarm, tap anywhere on the 

home screen. While the alarm is in snooze, a timer displays over the alarm icon counting down until the alarm sounds again.

1.  On the home screen, tap the 

User Menu

 icon. 

2.  On the user menu screen, tap 

Alarm

.

3.  On the alarm screen, tap the 

Audible Alarm Snooze 

arrow and use the slider to change the snooze time to up to 60 minutes. 

Switching on and adjusting the brightness of the 360° Safety Halo

1.  On the home screen, tap the 

User Menu

 icon. 

2.  To adjust settings for the 360° Safety Halo, tap the 

Safety Halo Setup 

arrow.

3.  To turn the 360° Safety Halo on, switch 

Enabled

 on.

4.  To adjust the brightness, move the slider to increase or decrease 

Brightness

.

5. 

To confirm the new settings, tap the 

Checkmark 

icon.

Adjusting the 360° Safety Halo nightly auto-dim and dimmed period

Change the nightly auto-dim feature to reduce the brightness of the 360° Safety Halo to a specified percentage and determine the time 

period in which you want to dim the light of the 360° Safety Halo.

1.  On the home screen, tap 

User Menu

 icon. 

2.  To view the nightly auto-dim feature for the 360° Safety Halo, tap 

Safety Halo Setup

.

3.  Switch on nightly auto-dim and move the slider to increase or decrease the 

Dimmed Level

.

4.  To adjust the period of time in which you want to dim the light of the 360° Safety Halo, tap 

Dimmed Period

 and scroll to the 

preferred start and end time.

5. 

To confirm the new settings, tap the 

Checkmark 

icon.

Setting the night mode

You can mute the audible alarm during the night. The screen and 360° Safety Halo still flash red when the monitor goes into alarm 

mode.

1.  On the home screen, tap the 

User Menu

 icon. 

2.  On the user menu screen, tap 

Alarm

.

3.  On the alarm screen, the 

Night Mode

 arrow.

4.  To set up a time period for the night mode, scroll to the preferred time under 

Start Time

 and 

End Time

.

5. 

To confirm your settings, tap the 

Checkmark

 icon.

Adjusting the alarm mode

When the differential pressure goes out of range, the display goes into alarm state. When you adjust the alarm mode, you can control 

how the display responds. See 

Table 9

 

for more information.

1.  On the home screen, tap the 

User Menu

 icon. 

2.  On the user menu screen, tap 

Alarm

.

3.  On the alarm screen, expand 

Alarm Mode

 and choose from the following options:

• 

Audible

• 

Mute

• 

Night

4. 

To confirm your settings, tap the 

Checkmark

 icon.

Содержание FMS-2000M




























Отзывы:

Нет отзывов