manualshive.com logo in svg

TRIATEK FMS-2000M, Руководство пользователя, Страница: 17 / 27

Поделиться
Скачать
TRIATEK FMS-2000M Скачать руководство пользователя страница 17

FMS-2000M

LIT-12013580

17

Network setup

In the network menu, you can set up the network communications between the FMS-2000M Critical Environment Monitor and the 

facility.

BACnet MS/TP network setup

On the BACnet MS/TP network, you can adjust the device ID offset, MaxMaster, baud rate, and MAC address.

Setting up the device ID offset

Specify a device ID offset from zero to 4,194,000. The device instance number that uniquely identifies a BACnet monitor within a 

network of FMS-2000M monitors is the sum of the device ID offset and the MAC address value.

1.  On the home screen, tap the 

Settings

 icon to enter the 

Settings

 menu.

2.  To view network settings, tap 

Network

.

3. 

To view the device ID offset, tap 

BACnet Protocol

.

4. 

To adjust the device ID offset, tap the 

Arrow

 icon.

5.  Enter a number between zero and 4,194,000.

6. 

To confirm the new settings, tap the 

Checkmark 

icon.

Setting up the MaxMaster

This parameter specifies the highest permitted address for a master node on the same network. The default value for this parameter 

is 127. Set this parameter to a lower value than the default to reduce the number of addresses polled by each master node on the 

network. This effectively improves the overall networking efficiency.

1.  On the home screen, tap the 

Settings

 icon to enter the 

Settings

 menu.

2.  To view network settings, tap 

Network

.

3.  To view the MaxMaster, tap 

BACnet Protocol

.

4.  To adjust the MaxMaster, move the slider towards the 

Plus

 icon to increase or the 

Minus

 icon to decrease the parameter. You can 

also tap the 

Plus

 or 

Minus

 icon to make adjustments.

5. 

Optional: 

Tap the 

Revert

 icon to revert to the previous setting.

6. 

To confirm the new settings, tap the 

Checkmark 

icon.

Choosing the baud rate

Complete the following steps to set the baud rate when using a BACnet MS/TP configuration:

1.  On the home screen, tap the 

Settings

 icon to enter the 

Settings

 menu.

2.  To view network settings, tap 

Network

.

3.  To set the baud rate, expand 

Baud Rate

 and select the appropriate rate.

4.  To save the new settings, collapse 

Baud Rate

.

Setting the MAC address for BACnet MS/TP

On the BACnet MS/TP protocol, you can set up a MAC address within a valid range of 4 to 127 to support master mode.

1.  On the home screen, tap the 

Settings

 icon to enter the 

Settings

 menu.

2.  To view network settings, tap 

Network

.

3.  On the Network screen, tap 

MAC Address

. 

4.  To adjust the MAC address, move the slider towards the 

Plus

 icon to increase or the 

Minus

 icon to decrease the parameter. You 

can also tap the 

Plus

 or 

Minus 

icon to make adjustments.

5. 

Optional: 

Tap the 

Revert

 icon to revert to the previous setting.

6. 

To confirm the new settings, tap the 

Checkmark 

icon.

Содержание FMS-2000M




























Отзывы:

Нет отзывов