manualshive.com logo in svg

TRIATEK FMS-2000M, Руководство пользователя, Страница: 21 / 27

Поделиться
Скачать
TRIATEK FMS-2000M Скачать руководство пользователя страница 21

FMS-2000M

LIT-12013580

21

Sensors

You can conduct a zero calibration and set alarm limits for each pressure sensor. On the zero calibration menu, you can create the zero 

offset and reset the zero offset. Swipe the screen to set each sensor.

Zero calibration

With the door to the monitored room open, the differential pressure that the FMS-2000M monitor measures usually approaches zero. 

However, due to imperfections in the sealing of the remote sensor enclosure and due to pressure accumulation in the wall, the pressure 

reading does not reach zero. If you leave the monitored room’s door open to allow pressure to equalize, it is common for the differential 

pressure to read up to 0.0010 in. W.C or 0.249 Pa.

Creating a zero offset

1.  Leave the door open to equalize the pressure between the monitored space and the reference space.

2.  On the home screen, tap the 

Settings

 icon to enter the settings menu.

3.  To view analog input settings, tap 

Analog I/O

.

4.  On the analog screen, tap the 

Zero Calibration

 arrow.

5.  On the zero callibration screen, tap the 

Create Zero Offset 

arrow.

6.  Follow the instructions on screen and wait for the real-time view reading on the screen to stabilize for at least 10 seconds.

7. 

To create a zero offset, tap 

Proceed

. 

Resetting the zero offset

If creating a zero offset does not result in a zero differential pressure reading when the pressure is equal, reset the zero offset before 

you repeat Creating a zero offset.

1.  On the home screen, tap the 

Settings

 icon to enter the Settings menu.

2.  To view analog input settings, tap 

Analog I/O

.

3.  On the analog screen, tap the 

Zero Calibration

 arrow.

4.  On the zero callibration screen, tap 

Reset Zero Offset

.

5. 

On the Reset Zero Offset screen, tap 

Proceed

.

6. 

To confirm the new settings, tap the 

Checkmark

 icon.

Setting up alarms for each pressure sensor

1.  On the home screen, tap the 

Settings

 icon.

2.  On the Settings screen, tap 

Sensors

. 

3.  On the Sensors screen, tap the 

Alarms

 arrow.

4.  On the Alarm screen, switch 

Alarm Enabled

 on.

5.  For each alarm limit, tap the arrow.

6.  Enter the alarm limit and tap the 

Checkmark

 icon to confirm your settings.

Содержание FMS-2000M




























Отзывы:

Нет отзывов