TREX SELECT страница 8 Скачать руководство пользователя

Страница: 8 / 32

Trex Decking:

When installing any Trex decking product, especially

Trex Transcend Tropicals, it is a good idea to mix
and match all of the boards on the job site prior to
installation to ensure an appealing mix of light and
dark tones.

DO NOT

combine Trex Select decking with other Trex

decking products. Trex Select boards are thinner than
Transcend and Enhance boards.

Railing (Including ADA Handrail):

»   First, pick the railing style you want.
»    Calculate your spanning based on the railing you chose.
»    Determine the number of balusters you will need based

on the railing you chose.

NOTE:

For post placement on stairs, it is VERY

IMPORANT to plan your post spacing based on
the length of the rail and angle of the stairs. For
nominal 6' and 8' stair rail lengths, stair post
spans (measured horizontally) will be less than 6'
or 8' due to the angle of the stairs.

NOTE:

Trex Transcend and Select horizontal railings are

made to be installed at maximum of 6' (1.83 m) or 8'
(2.44 m) on center (depending upon type of railing you
choose). Those railings are not true 6' (72") or 8' (96") in
length. Trex Signature railing and Rod Rail are made to be
installed at maximum 6' or 8' CLEAR SPAN
BETWEEN POSTS.

» Determine post locations prior to installing any

decking. In most cases, posts are usually installed
before decking is installed.

» Confirm with your local building official if ADA

Handrail is required, and if so plan spanning for posts
accordingly to allow for attachment of Trex ADA
Handrail. ADA Handrail requires a span of
6' OC for posts.

» Grill placement: A good recommendation to help

prevent damage to your railing is to not have a grill too
close to your railing. Allow for ample airspace
(6" or more is recommended) between the back/sides
of your grill to help prevent charring or staining to the
railing.

Refer to www.trex.com to view detailed install instructions
for Transcend, Select, or Signature railing.

Trex Lighting:

Plan locations of lights, power supply, timer, and

dimmer. These should be accessible for service if
necessary.

Install wiring before decking and railing have been

installed.

DO NOT

run wires between joists and deck boards.

Refer to www.trex.com to view detailed Trex lighting
instructions.

Trex

RainEscape

Deck Drainage System:

Plan ahead for deck layout to allow for proper
placement of Trex RainEscape within the joist system.

Make sure joists are straight and square.

See www.trex.com for more information on Trex
RainEscape recommendations and installation. Trex
RainEscape is manufactured and distributed by Dri-Deck
Enterprises, LLC, under a trademark license with Trex
Company, Inc.

Installing Hot Tubs, Planters, and Seating:

Plan ahead proper joist spanning if required (this is

especially important if installing a hot tub).

Refer to page 33 for Trex Decking Span Chart for
specific loads.

Call 1-800-BUY-TREX for detailed questions.

Planning Ahead

*DeckProtect

is a registered trademark of Infinite Heat Solutions.