Configuration Variables
39
Default Value:
1440 (24 hours)
Description:
Dynamically assigned addresses can be peri-
odically “refreshed” by a DHCP server. The IP Lease Time
variable allows you to set that time limit. If a time is entered
in this variable, each dynamically assigned address will be re-
cycled at the end of the lease time.
IP Reserve Table
Options:
Local IP Address, MAC Address (a maximum of 16
separate line entries).
Default Value:
(none)
Description:
The IP reserve table specifies ownership of par-
ticular IP addresses by particular stations or servers
(identified by MAC address) so that those IP addresses will not
be used by other devices on the LAN under any circumstances.
(Note that devices listed in the Server Address Variables table
should have their IP addresses listed here if DHCP is going to
be used so that their IP addresses don’t get assigned to other
network stations.)
Server Address Variables
The Server Address Configuration table allows you to setup local
servers, for example an FTP or web site, and provide non-local access
to them through the internet/print multiple server. Entries in the
table associate a port number with the local IP of a particular LAN
server so that users not on the LAN can access that server.
The internet/print multiple server supports virtual internet servers
so that your single-point ISP internet access can be used to provide
Содержание TW100-P1W1
