Internet/Print Multiple Server User’s Guide
System Setup
18
We recommend that you make a note of each device’s IP address for
reference during troubleshooting or when adding new stations or de-
vices.
Using In-Band Telnet to Configure
the Server
Once your PC is configured with an IP address on the same subnet
as the server, start your Telnet program and enter the IP address
assigned to the server when you are prompted for a host address.
You should immediately see the internet/print multiple server Telnet
Interface console greeting screen.
Enter the password to access the device parameters. There is no de-
fault password. Once you have access, use the menu item numbers
to set the variables which are described later in this chapter.
Note:
When using Telnet to modify device
parameters, saving those parameters
immediately ends the Telnet session.
Using a Browser to Configure the
Server
Once your PC is configured with an IP address on the same subnet
as the server, start your browser program and enter the “http://” pre-
Содержание TW100-P1W1
