TRENDnet TV-IP742SIC, Руководство пользователя

Страница: 6 / 53

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP742SIC
4
Direct Connection
Another method to connect to the IPcam is via direct connection. This will allow you to
configure the device with network settings, suitable for your network
1. Attach the Power Supply. Attach the included power supply to the DC 5V 1.0A
power adapter on the rear panel of the camera and then connect it to a wall
outlet or power strip. Two blue LED’s will light up above the lens indicating that
the camera has power.
2. Go to the open the network sharing center and make sure your network
settings are turned off and you have a wi-fi network card enabled.
3. Look under network available devices for the SSID TRENDnet742 and connect
to the device.
4. Using your web browser connect to IP address 192.168.30.30 by typing into the
browser “192.168.30.30”
Wall mount installation
To attach the plastic plates carry out the following:
•
To attach the wall mount to a wall, secure the plastic mount to the wall and use
the two self-tapping screws; to screw the mount to the wall.
•
Slide the plastic plate on the base of the camera; to the mount plate of the wall
mount, making sure that the two holes on the base of the camera align with
the two plastic clips on the base of the plastic mount.
•
Secure the plastic plate to the base of the Camera by pushing back on the base
of the camera firmly.