TRENDnet TV-IP742SIC, Руководство пользователя

Страница: 4 / 53

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP742SIC
2
Product Hardware Features
Front & Side Panel View
1. LED – This is one of two LED indicators. The LED is blinking green when WPS is
activated.. The LED will flash Orange when direct connection mode is enabled.
2. LED – This is the second of two LED indicator. The LED is solid blue when your
camera is powered on. If this LED indicator is off, there is no power to your
camera. LED will blink green when WPS is activated. And maintain a steady
green when connected to a network.
3. IR LED – Built-in IR LED for night vision uses.
4. Camera Lens – The camera lens.
5. Night/Day Sensor – Detects the light source to turn IR on or off.
6.
Microphone
– Built-in microphone for audio can be turn on or off.
7. Base – The base allows manual tilting and panning of the device.
8. WPS Button – ( Wi-Fi Protected Setup) – Push and hold this button for 3
seconds to activate WPS.
9. Reset Button – Use an item such as a paperclip to push and hold this button for
6 seconds and release to reset your camera to its factory defaults.
Rear Panel View
1. Speaker – Built in speaker.
2.
Power Port – Connect the included power adapter from your camera to an
available power outlet.
Note:
Use only the adapter that came with your camera.