TRENDnet TV-IP430PI Скачать руководство пользователя страница 45

Страница: 45 / 58

TRENDnet User’s Guide

TV-IP430PI

Alarm Input

Alarm Input No. Select the alarm input number

Alarm Name

Input the alarm name

Alarm Type Two alarm types. NO for (Normally Open) and NC

(Normally Closed).

Normal Linkage

Send Email When the alarm is triggered, the camera will send

an email notification.

Upload Snapshot When the alarm is triggered, the camera will upload

a snapshot to FTP.

Network Storage When the alarm is triggered, the camera will upload

video clip to network storage.

Audible Warning When the alarm is triggered, the camera will have

beep sound.

Notify Surveillance Center When the alarm is triggered, the camera will send a

notification message to the VMS.

Trigger Alarm Output

Select All Select the Alarm output.

PTZ Linking

Preset No. When the alarm input is triggered, the camera will

move to this preset location.

Patrol No. When the alarm input is triggered, the camera will

call this patrol.

Pattern When the alarm input is triggered, the camera will

call this pattern.

Copy to Alarm

Select All Copy the settings to other alarm.

(Note: This option is for the camera that has
multiple alarm output channels.)

Click

Save

to save the changes

Alarm Output

Choose Alarm Input number, name and alarm type. The alarm type could be NO
(Normally Open) and NC (Normally Closed).

Alarm Output

Alarm Output Select the alarm output number

Alarm Name Input the alarm name

Delay: Delay time to trigger the alarm output.

Copy To Alarm

Select All Copy the settings to other alarm.

(Note: This option is for the camera that has
multiple alarm output channels.)

Содержание TV-IP430PI



























































Результаты поиска

Содержание TV-IP430PI

Отзывы:

TRENDnet TV-IP430PI, Руководство пользователя, Страница: 45 / 58

Результаты поиска

Содержание TV-IP430PI

Отзывы: