TRENDnet TV-IP430PI Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 58

TRENDnet TV-IP430PI Скачать руководство пользователя страница 33

© Copyright 2015 TRENDnet. All Rights Reserved.

31

TRENDnet User’s Guide

TV-IP430PI

Display Settings

Sharpness:

Use the slider or enter a number (0-100) to adjust
the image sharpness. Default: 50

Focus Mode:

Auto: allows the camera to focus automatically at
any time.

Manual: use the

icon in the live

view page to control focus manually.
Semi-auto:  cameras  focuses  only  once  after
pan/tilt/zoom.

Minimum Focusing:

This function is used to limit the minimum focus
distance. The value can be set to 1.5m, 3m, 6m,
10cm and 50cm.

Exposure Mode:

Iris

Shutter Speed

Manual:  Once  selected,  you  can  adjust  the  Iris  and
shutter speed from the extended options menu.

Auto:  The  iris  and  shutter  values  will  be  adjusted
automatically  according  to  the  brightness  of  the
environment.

Iris Priority:
The value of iris needs to be adjusted manually. The
shutter  values  will  be  adjusted  automatically
according to the brightness of the environment.

Shutter Priority:

The value of shutter needs to be adjusted manually.
The iris values will be adjusted automatically
according to the brightness of the environment.

«
...
31
32
33
34
35
...
»

Содержание TV-IP430PI



























































Отзывы:

Нет отзывов