TRENDnet TEW-820AP, Руководство пользователя

Страница: 32 / 51

TRENDnet User’s Guide
TEW-820AP
1. Log into your access point management page (see “ Access your access point
management page” on page 8).
2. Click on Access , click on User Limit.
3. Review the User Limit options, click Save Settings to save settings.
•
Enable User Limit: Select this option to turn on user limit feature
• User Limit: Enter the amount of users you would like to allow on your wireless
network.
Change your access point login password
Main > Password
1. Log into your access point management page (see “ Access your access point
management page” on page 8).
2. Click on Main , and click on Password .
3. Under the Password section, in the Password field, enter the new password. Click
Save Settings
to apply changes.
Note:
If you change the access point login password, you will need to access the
access point management page using the User Name “admin” and the new
password.
Change your device name
Main > Password
1. Log into your access point management page (see “ Access your access point
management page” on page 8).
2. Click on Main , and click on Password .
3. Under the Device Name Settings section, in the Device Name field, enter the new
device name to display on your network to identify the access point. Click Save
Settings to apply changes.
Note:
The access point’s device name is used to access the device using the URL
feature. If changed the device name you will need to access your access point
management page using your new access point IP address. (e.g. Instead of using
the default login URL http://tew-820AP
IPv6 Connection Settings
Main > IPv6
IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the
number of available Internet public IP addresses due to the 128-bit IP address structure
versus IPv4 32-bit address structure. In addition, there are several integrated
enhancements compared to the most commonly used and well known IPv4 (Internet
Protocol Version 4) such as:
•
Integrated IPsec – Better Security
• Integrated Quality of Service (QoS) – Lower latency for real-time applications
•
Higher Efficiency of Routing – Less transmission overhead and smaller routing tables
• Easier configuration of addressing
1. Log into your access point management page (see “
Access your access point
management page” on page 8).
2. Click on Main , and click on IPv6 .
3. Select the IPv6 connection type to assign IPv6 addressing to the access point.
© Copyright 2014 TRENDnet. All Rights Reserved.
31