TRENDnet TEW-820AP, Руководство пользователя

Страница: 31 / 51

TRENDnet User’s Guide
TEW-820AP
•
Connected Time: Time duration of how long the access point has been
connected.
•
MAC Address: MAC address of the access point is connected
Advanced Access Point Setup
MAC Address Filters
Access > MAC Filters
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
MAC filters, you can allow or deny specific computers and other devices from using this
access point’s wireless network. You can enter up to 24 MAC address entries.
1. Log into your access point management page (see “
Access your access point
management page” on page 8).
2. Click on Access , click on MAC Filters.
3. Review the MAC Filter options, click Save Settings to save settings.
Click the
Configuring MAC Filtering below
drop-down list to choose the MAC filter
function.
• Turn MAC Filtering OFF: disables the MAC address filter.
• Turn MAC Filtering ON and ALLOW computers listed to access the network Only
Allow computers/devices with MAC addresses listed to access the access point
management page and the Internet. Deny all others.
Turn MAC Filtering ON and
DENY computers listed to access the network
Only Deny computers/devices with MAC addresses listed to access to the access point
management page and the Internet. Allow all others.
Note:
MAC filter can be configured to allow access to the listed MAC address and deny
all others unlisted or vice versa. The recommended function is to choose to only allow
access to the MAC addresses listed and deny all others unlisted because it is easier to
determine the MAC addresses of devices in your network then to determine which MAC
addresses you do not want to allow access.
Before saving settings, add the MAC addresses to the MAC Table and configure the
options first.
• MAC Address: Enter the MAC address of the devices you would like to filter.
(e.g.
00:11:22:AA:BB:CC)
Note:
If you uncertain of the device MAC address, please refer to your computer or
device documentation to find the MAC address.
•
Schedule: Select from the pull down menu a schedule of when to apply the MAC
filter rule, or click Add New to add a new schedule.
User Limit
Access > User limit
The access point allows you to configure the amount of users allowed to connect to
your wireless network.
© Copyright 2014 TRENDnet. All Rights Reserved.
30