TRENDnet TEG-7080ES, Руководство пользователя, Страница: 26 / 35

© Copyright 2018 TRENDnet. All Rights Reserved.
24
TRENDnet User’s Guide
TEG-7080ES
Reboot/Reset to factory defaults
Tools > Reboot
This section provides the procedures for rebooting or resetting the switch to factory
default settings.
To reboot your switch:
You may want to reboot your switch if you are encountering difficulties with your switch
and have attempted all other troubleshooting.
Note: You may want to save the settings to flash before reboot the switch under Save
Settings to Flash (menu) > Save Settings to Flash (button). If you have not saved your
current configuration settings to flash first, the configuration changes will be lost after a
reboot.
There is one method that can be used to reboot your switch.
•
Software Method (Switch Management Page):
1. Log into your switch managem ent page (see “ Access your switch management page ”
on page 7).
2. Click on Tools and click on Reboot.
3. Click the Reboot Type drop-down list and select Normal and click Apply to initiate a
reboot. Wait for the switch complete the rebooting process.
To reset your switch to factory defaults:
You may want to reset your switch to factory defaults if you are encountering difficulties
with your switch and have attempted all other troubleshooting. Before you reset your
switch to defaults, if possible, you should backup your switch configuration first, see
“ Backup and restore your switch configuration settings ” on page 22.
There are two methods that can be used to reset your switch to factory defaults.
•
Hardware Method: Using a paper clip, on the front panel of the switch, push and
hold the Reset button more than 3 seconds and release. Located on the back
panel of your switch , see “ Product Hardware Features ” on page 2. Use this method
if you are encountering difficulties with accessing your switch management page.
•
Software Method (Switch Management Page):
1. Log into your switch management page (see “ Access your switch management
page ” on page 7).
2. Click on Tools and click on Reboot.
3. Click the Reboot Type drop-down list and select the following option
o
Factory Default: Resets all switch configuration settings to factory
defaults.
o
Factory Default Except IP: Resets all switch configuration settings to
factory defaults and leaves the current IP address configuration
The switch factory default settings are below.
Administrator User Name admin
Administrator Password admin
Switch IP Address 192.168.10.200
Switch Subnet Mask 255.255.255.0