TRENDnet TEG-7080ES, Руководство пользователя, Страница: 24 / 35

© Copyright 2018 TRENDnet. All Rights Reserved.
22
TRENDnet User’s Guide
TEG-7080ES
Firmware Upgrade via HTTP Settings
Tools > Firmware Upgrade > via HTTP
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Tools , click on Firmware Upgrade , and click via HTTP .
3. Depending on your web browser, in the Firmware Upgrade via HTTP Settings , click
Browse or Choose File .
4. Navigate to the folder on your computer where the unzipped firmware file ( .hex ) is
located and select it.
5. Click Apply . If prompted, click Yes or OK .
Backup and restore your switch configuration settings
Tools > Config File Backup/Restore > via HTTP
You may have added many customized settings to your switch and in the case that you
need to reset your switch to default, all your customized settings would be lost and
would require you to manually reconfigure all of your switch settings instead of simply
restoring from a backed up switch configuration file. The configuration will be backed up
or restored only to the currently used image.
Backup/Restore via HTTP Settings
To backup your switch configuration:
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Tools , click on Config File Backup/Restore and click on via HTTP .
3. Click Backup to save the configuration file (config.bin) to your local hard drive.
Note: If prompted, choose the location on your local hard drive. If you are not prompted,
the configuration file (config.bin) will be saved to your default downloads folder.
To restore your switch configuration:
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Tools , click on Config File Backup/Restore and click on via HTTP .
3. Next to Select File, depending on your web browser, click on Browse or Choose File .
4. A separate file navigation window should open.
5. Select the switch configuration file to restore and click Restore . (Default Filename:
config.bin ). If prompted, click Yes or OK .
6. Wait for the switch to restore settings.