TRENDnet TEG-7080ES, Руководство пользователя, Страница: 20 / 35

© Copyright 2018 TRENDnet. All Rights Reserved.
18
TRENDnet User’s Guide
TEG-7080ES
Configure VLAN Port Settings
Bridge > VLAN > Port Settings
In this section, you can modify the port VID settings.
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Bridge , click on VLAN, and click on Port Settings .
3. Review the settings for each port. Click Apply to save settings.
•
Port – Displays the port number
•
PVID – Allows users to assign VLAN IDs for untagged packets through 802.1q
VLAN.
4. Click Apply to save configuration changes to the NV-RAM to ensure that if the switch
is rebooted or power cycled, the configuration changes will still be applied.
Configure the VLAN forwarding Table
Bridge > VLAN > Dynamic Forwarding Table
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Bridge , click on VLAN, and click on Dynamic Forwarding Table .
3. This table displays the MAC addresses learned by the switch, along with responding
VLAN, and Port (including trunk groups).
If the entries span multiple pages, you can click the Arrow buttons to navigate the
pages.