TRENDnet TE-350, Руководство пользователя

Страница: 25 / 60

NetWare Setup
23
4. Select the queue that you want the printer to service.
5. Press
[E
NTER
] .
6. Repeat Steps 1 to 5 until all printer and queue association are
configured.
7. Exit PCONSOLE
D.
Send Setup Information to TE-350
To store the TE-350 configuration in the TE-350 NVRAM, fol-
low the steps below:
1. Run PSCONFIG program
2. Select your TE-350.
3. Select
Set to NetWare Remote Printer Mode
4. Enter NetWare Print Server Name you selected in Step B-2
for all print ports.
5. Replace device name with the name in Step B-6.
6. Select
Execute Setup .
E. Unload and Reload Pserver
If the Netware Pserver, to which the TE-350 has been installed,
has been previously loaded, you must unload and reload it. If the
NetWare Pserver has not been loaded you must load it. If un-
loading and reloading the NetWare Pserver go to step 1. If
loading for the first time, go to step 4.
1. Go to the file server console where NLM is running
2. Press
Alt-E
SC
until you get to the Print Server NLM screen.
3. Press E
SC
to halt the print server NLM. Answer Yes.
4. Once the NetWare NLM has been unloaded, enter the
following command: load pserver XXXX
XXXX in the NetWare print server selected in step B-2.
5. When the Enter Print Server Name menu appears, press
I
NSERT
until you get to Contents of Current Context. Select
the context that holds the print server. Select the print server
from the list and press E
NTER
.