TRENDnet TE-350, Руководство пользователя

Страница: 11 / 60

C
HAPTER
2
Hardware Installation
This chapter describes the procedures to install TE-350 hardware on a
local area network. To install TE-350 hardware, follow the instruc-
tions below:
Finding the Default TE-350 Name
The default name you are installing is located on a bar code sticker at-
tached to the bottom of the TE-350 unit( SCXXXXXX Make note of
the name. It will be needed to configure the TE-350.
During configuration you will have the opportunity to
change the print server name. When doing so, it is im-
portant that you do not use any blanks.
Connecting Printer Cable
Plug TE-350 directly into the printer or plotter parallel port.