TRENDnet TE-350, Руководство пользователя

Страница: 12 / 60

TE-350 Print Server
8
If the TE-350 is powered on, make sure to take the
printer Off-Line before connecting it to the TE-350.
Failure to do so may cause the printer to print garbage.
After the printer has been connected to the TE-350, put
the printer back On-Line.
Connect the Network Cable
The TE-350 network interface auto-sensing feature detects which
network interfaces are used and automatically adjusts to that network
environment. To connect the network cable to the TE-350, do the fol-
lowing:
1. Determine which type of cable your network uses.
2. Connect the network cable to the proper connector on the
TE-350 panel.
Ethernet Network
The following Ethernet network cables may be attached to the TE-
350:
•
Thin Ethernet (10Base-2, BNC connector)
•
Twisted Pair Ethernet (10Base-T, RJ45 connector)
Connecting Power Adapter Cable
Plug in the power adapter cable. Check the Power and Status LED in-
dicators on the front panel. When the Red Status indicator LED goes
out and the Green Power indicator LED remains lit or flashes, TE-350
is ready to service print jobs.
Only use the power adapter provided with the TE-
350. Using a different one may cause hardware dam-
age.