TREND CDJ300, Руководство пользователя

Страница: 29 / 50

-29-
CDJ300 & CDJ600
Joint too loose = increase depth
adjustment of cutter.
Joint too tight = decrease depth
adjustment of cutter.
Dovetail joint too shallow = move template comb
towards the jig body.
Dovetail joint too deep = move template comb
away from the jig body.
Fit edge guide into hole
according to table.
For drawer front rout a
9.5mm wide by 6.35mm
deep rebate.
Draw a setting template line
7.5mm back from 9.5mm
rebate shoulder.
Routing Tails on
Drawer Sides
Place router onto template
comb.
Switch on.
Carefully rout from left to
right following the guide
bush in the each of the
slots.
Switch off router and
remove from jig.
Examine each of the slots
to ensure all the material
has been cleanly routed.
Remove template comb
assembly.
Remove timber from jig.
Test fit joint.
*
From CDJ600 jig.
11
10
9
8
7
6
5
4
3
2
1
Size Colour Hole Dia. Dia. Setting line Depth
CDJ300/01
15.8Øx6 Green U2 7.8 6.0 7.5 11
1/4” Rebated
28.7Øx4 Green F2
CDJ600/01
20.1Øx9.5 Green U2 7.8 6.0 7.5 11
1/4” Rebated
10Øx10
*
Green F1
Dimensions
shown in mm.
For Drawer Fronts
See points to
on pages 25 to 26.
For Drawer Sides
See points to
on page 26.
For Routing Tails on
Drawer Sides
See points to
on page 25 to 26.
36 28
27 22
21 4
1/4” (6.35MM) REBATED LAPPED
DOVETAIL TEMPLATE
9.5mm
(3/8")
6.35mm
(1/4")
9.5mm
(3/8")
INSIDE