2
Install your TPS 440T and 2200T security devices
Overview
Your TPS security device ships with the following components:
— A 440T (1U) or 2200T (2U) rack-mountable TPS device with redundant power supplies
— 1 AC power cable (440T device) or 2 AC power cables (2200T device)
— Rack-mounting slide rail kit
— Pre-formatted CFast external storage card
— Null modem cable for the console port
Install and configure your device
To install the device, mount the device in a rack, connect the cables, and then complete the software
setup by using the following steps.
Refer to the following diagram of the chassis front panel when you install and configure the device.
Figure 1. TippingPoint TPS 440T and 2200T security devices – front panel
Step 1. Determine total rack space
Before you install the chassis, determine the total rack space that is required to install your device.
If you plan to expand your security solution to include additional devices in the future, allow space in
the rack for additions.
TippingPoint security devices fit in a 19-inch rack. When you use additional, appropriate accessories,
each device also fits in a 23-inch rack.
1. 10 GbE SFP+ ports
5. Dedicated HA port
9. Alert indicator LED
2. 1 GbE SFP ports
6. External ZPHA port
10. Status indicator LED
3. 1 GbE copper ports
7. Console port (top) and Management port (bottom)
11. Power indicator LED
4. External CFast card
8. Power button (440T devices have power switch on back panel)
