Installation
This chapter describes the site requirements of your installation location.
Before You Begin
Follow the steps in this section before you install the appliance.
Before Opening the Box
• Review the packing slip contained in the plastic slip attached to the top of the box.
Ensure the shipment contains the correct appliance.
• Ensure the serial number listed on the packing slip matches the one specified on the
sticker located on one side of the box.
• If there appears to be damage to the box, file a damage claim with the carrier who
delivered it.
Unpacking the Appliance
Carefully remove the appliance from the box in an area away from heat, electrical noise, and
electromagnetic fields.
Ensure your box contains:
• The correct appliance model
• An accessory kit
• Online Documents Portal Referral
• A rail kit
Installation Site Guidelines
Follow these guidelines w hen you select an installation site:
• Leave enough clearance in front of the rack for its door to open completely without
obstruction.
• Avoid environments that produce heat, electrical noise, and electromagnetic fields.
• Only install the appliance in a restricted access location such as a service closet or
dedicated equipment room.
• Make sure the location is properly ventilated.
• Make sure there is sufficient space for air flow.
EX Series
Installation
Page 12
© 2022 FireEye Security Holdings US LLC
