Trelawny SF11EX, Руководство по эксплуатации и обслуживанию

Страница: 6 / 16

PAGE 6
SF11ex DECK hammer
FOREWORD
GENERAL INFORMation
SAFETY
Thank you for your purchase of the SF11Ex Deck Hammer. This
manual contains the necessary maintenance information for
you to ensure proper operation and care for this machine. It is
essential for you to read through
this manual thoroughly. In the unlikely event that you experience problems with your SF11Ex Deck Hammer,
please do not hesitate to contact your local Trelawny
dealer or agent. We always welcome feedback and
comments from our valued customers.
Before operating the SF11Ex Deck Hammer, this manual
must be read and understood by the operator, if in any doubt
ask your supervisor before using this equipment. Failure to
follow these instructions could result in damage to the Deck
Hammer and/or personal injury.
Trelawny SPT Ltd disclaims all responsibility for damage to
persons or objects arising as a consequence of incorrect
handling of the tool, failure to inspect the tool prior to starting
work for damage or other faults that may influence the
operation or safe working of the tool, or failure to follow the
safety regulations listed or applicable to the job site.
The tool is primarily designed for the removal of heavy rust,
paint and scale from ships decks or heavy steel surfaces.
This tool must not be used in a fixture..
Operators should be familiar with the data given in the
specification section.
Please keep these instructions in a safe and accessible place.
Do:
- Be aware that this tool is not electrically insulated.
- Be aware that the tool can create dust and flying debris.
- Keep hands and clothing away from moving parts.
- Be aware of others working around you.
- Ensure that this tool is lubricated daily.
- Store this tool in a secure and dry environment.
- Wear Personal Protective Equipment including safety
goggles, footwear, ear defenders and gloves. In some
environments it will be necessary to wear facemasks or
breathing apparatus.
- Use with a Trelawny specified ATEX HEPA Vacuum.
- Always observe safe-working practices at all times.
Do not:
- Allow the tool to run unattended.
- Do not allow the tool to run continuously whilst not in contact
with the surface being prepared.
- Modify this tool in any way, this will invalidate the warranty
and could also lead to serious injury.
- Do not drag this tool by the air hose.
- Do not use petrol (gasoline), thinners or any other high flash
point solvent to clean the tool.
Please note: Unrestrained hoses can whip if they become
detached. Ensure that the work place is well ventilated.
WARNING! Before operating, performing maintenance
or repairing the SF11Ex this manual must be read and
understood. If in any doubt, ask your supervisor before
using this equipment. Failure to follow these instructions
could result in damage to the Deck Hammer and/or
personal injury.
WARNING! Always observe safe-working practices at
all times.