Trelawny SF11EX, Руководство по эксплуатации и обслуживанию

Страница: 13 / 16

www.trelawny.co.uk
Machinery Directive Information:
This tool has been designed and produced in accordance with the following directives:
2006/42/EC Machinery Directive
and applicable harmonised standard: EN ISO 1 1148-4:2012
EN ISO 11148-4: 2010 Hand Held Non-Electric (Non-Rotary
Percussive Tools)
This tool conforms with the following EC legislation: ATEX DIRECTIVE 2014/34/EU
Based on the following harmonised standards: EN60079-0:2018
EN ISO 80079-36:2016
EN ISO 80079-37
Notified Body: Element Material Technology LTD
Certificate Number: EMT19ATEX0021X
If your company has any problem with our products or would like to discuss the possibility of an improvement being made to them, then please do not hesitate to
contact us. Your comments are both important and appreciated.
Trelawny tools are thoroughly tested under specified conditions in accordance with applicable internationally recognised standards. When a tool is used on site the
conditions may not be the same as those used in our tests.
Trelawny Surface Preparation Technology operates a policy of continuous product development and refinement and therefore reserves the right to change technical
specifications and product designs without giving prior notice.
© Copyright 2015, Trelawny SPT Limited, CV31 1XT. UK All rights reserved. Any unauthorised use or copying of the contents or part thereof is prohibited. This applies
to trademarks, model denominations, part numbers and drawings. Use only genuine Trelawny spares.
The use of non-Trelawny spare parts will invalidate the ATEX certification and also the warranty.
Trelawny SPT Ltd
13 Highdown Road, Sydenham Industrial Estate, Leamington Spa, Warwickshire, CV31 1XT, United Kingdom
Telephone: +44 (0) 1926 883781 – Fax +44 (0) 1926 450352
Email: sales@trelawny.co.uk