![Treif PRIMUS 400 Скачать руководство пользователя страница 95](http://html1.mh-extra.com/html/treif/primus-400/primus-400_operating-manual_1155190095.webp)
Clea
ning
Cleaning schedule for daily cleaning
84
07/2019 244156V03_EN
ADDITIONAL INFORMATION
The contents of the crumb drawer are unfit for consumption!
CAUTION
Risk of injury on the upright knife!
The cut-off knife is very sharp. There is increased risk of injury in the case
of unsafe handling of the cut-off knife.
Wear personal protective equipment.
Only store dismantled blades in safe places!
Never touch the blade’s cutting edge.
Make sure that no unauthorised persons have access to the knife.
8. Step
Empty the crumb drawer and dispose of the contents.
Use a clean hand brush to remove product scraps and crumbs.
.
.
Step
Daily blade cleaning:
- Move the blade to the cleaning position.
- Wipe the blade with a damp, lint-free and clean cloth
until the deposits on the blade and cutting edge have been removed.
Avoid the
formation of droplets
!
- Now dry the blade.
To completely clean the blade, you need to repeat the process of accessing the
cleaning position several times.
page 78
10. Step
Clean the area below the crumb drawer with a clean hand brush.
11. Step
Always check afterwards whether the machine is perfectly clean.
Particularly check areas that come into contact with product and adjacent areas.
Remove possible stickiness with a moist lint-free cloth.
Check the safety signs after each cleaning.
- An overview of the safety signs can be found in chapter
“Information signs on the machine” on page 14.
12. Step
Insert crumb drawer.
page 86
13. Step
Check whether all reinstalled parts are in their correct position and properly fas-
tened.
14. Step
Close the front door.
15. Step
Close the infeed cover.
V_008-02
Содержание PRIMUS 400
