treesse Fusion SKI, Руководство по предварительной установке

Страница: 20 / 24

20
Pre-Installation Fusion SKI
bathtub
EN
The Treesse minipools are built in compliance with
European laws (EN 60 335-2-60) and are tested during
production to ensure the safety of the installer and user.
The electrical preparations are to be performed by a
suitably qualified and certified electrician.
All electrical preparations must be performed only
after disconnecting the electricity in the work area.
The electrical connection must be:
• Performed in a
fixed and permanent manner
, without
intermediate splices, in accordance with regulations of
the country of installation.
• Sufficient for the current absorbed by the bathtub
(see technical specifications).
• Provided with a functioning
ground as per current
regulations
.
• Protected against splashing water
, then placed
in a dedicated room, closed and sheltered from the
weather.
6
ELECTRICAL PREPARATIONS
• Controlled by a
multi-pole switch
with a contact gap of
at least 3 mm and a breaking capacity equal to 60A (or
in any case adequate for the absorption of the bathtub).
• Controlled by a
differential switch
no larger than
30mA.
The control unit's power supply cable must be of the H05
type with three wires (single-phase 220V) whose gauges
are adequate for the absorption of the bathtub (see
pre-installation sheet). Its size depends on the absorbed
current and the distance of the bathtub from the main
electrical cabinet.
The Manufacturer is not responsible for connections
made in a way that does not comply with local
codes, the specifications in this pre-installation
sheet or tampering with any electrical component of the
bathtub.
min.
60 cm
min.
60 cm
min.
60 cm
min.
60 cm
min.
60 cm
MIN. 230 cm
MIN. 230 cm
Local regulations prohibit any electrical installation (plug sockets, switches, lamps, etc.) in the area surrounding
the bathtub for a distance of at least 60 cm and a height of 230 cm.
Position of the electrical connections: see initial pages.