treesse Fusion SKI, Руководство по предварительной установке

Страница: 16 / 24

16
Pre-Installation Fusion SKI
bathtub
EN
Pre-Installation
OPTIONAL
RECESSED INSTALLATIONS
As a base, create a reinforced concrete recess having a
thickness that is able to support the weight of the bathtub
and the people using it.
The manufacturer suggests a minimum load of 350 kg/m
2
.
In any case contact a qualified construction engineer to
calculate the appropriate load for the installation site.
Wedges or shims cannot be placed under the
bathtub to level it, only the feet of the bathtub
can be adjusted.
Remember to ground the structural reinforcement in ac-
cordance with electrical codes.
If it was not possible to provide a technical inspection
port on all sides of the bathtub, a pneumatic lift is
available (OPTIONAL - to be requested from the
Manufacturer) in
order to simplify
f u t u r e
m a i n t e n a n c e
operations. It is
recommended to
p r o v i d e a
r e m o v a b l e
inspection hatch
"A" positioned on the side where the bathtub components
are situated.
Prepare:
•
A
A technical inspection port at least 50 cm wide on all
sides of the bathtub. This will make future maintenance
or repairs easier.
•
B
Drainage grating around the perimeter and in
the recess to help preserve the equipment and the
structure (even for indoor installations).
•
C
Flooring (it is recommended to choose a flooring
that minimises the possibility of slipping when getting
in and out of the bathtub).
•
D
Two Ø15 cm vents to ensure proper ventilation and
extraction of the heat and moisture from the technical
compartment.
•
E
Insulation.
For the preparation of the water and electrical
connections see the pertinent section on page 18
and 20.
56,5
See the plumbing and
electrical preparations on
page 18 and 20.
A
Technical compartment for
maintenance of operational
components: plan for 50 cm
on all sides of the bathtub
B
Internal drainage grates
E
Insulation
D
2 Ø15 cm vents to ensure
proper ventilation of the
technical compartment
C
Flooring (it is recommended to
choose a flooring that minimises the
possibility of slipping when getting
in and out of the bathtub)
FUSION SKI
220 - 230 (measur
ements in cm)
Concrete slab with a thickness suitable for
supporting the weight of the b the
weight of the people within