Trebs CC-105, Руководство по эксплуатации

Страница: 29 / 32

There are four different views for the monitor, each time the Image
Orientation button is pressed the image will change.
There different views allow you to mount the camera and/or monitor
either right aide up or upside down and still display the image correctly
on the monitor. The image displayed should match your rear view mirror.
After testing the unit, fully tighten the license plate bolts.
Route all wire behind interior panels or under carpeting so they are hidden.
Use supplied cable ties to neatly gather any excess wire.
A+ A+
Forward
A+ A+
Mirror
A+ A+
Forward&
Upside Down
A+ A+
Forward&
Upside Down
Keep camera lens and minotor clean to ensure optimum picture quality.
-11-
TESTING THE SYSTEM
1.Re-attach the vehicle's negative battery cable.
2.Engage the parking brake and turn the ignition key to the ON position.
DO NOT start the vehicle. Put the gear shift into reverse.
3.The camera will start broadcasting, and the monitor will detect the
signal and turn itself ON. If the monitor does not come ON press the
ON/OFF button.
4.If the image does not match your rear view mirror, press the top button
on the monitor to change the image until it matches your rear view
mirror.
5.When you take the gear shift out of reverse the camera will turn OFF,
and the monitor will turn black.