Trebs CC-105, Руководство по эксплуатации

Страница: 28 / 32

+12 VDC
REV LAMP
GROUND
Reverse Lamp
RED
BLACK
The camera's antenna extends
down the camera's cable. Do not
cut the camera's cable shorter
than 41cm or 16''.
2.4GHz WIRELESS CAMERA
TM
SCOTCH-LOK INSTRUCTIONS
Insert the existing
wire to be tapped.
Insert the wire to
be attached. Crimp tap with pliers,
then close lock
TM
You do not need to use the Scotch-Lok connectors. The camera can
be wired directly to the reverse light circuit by stripping the reverse light
wires then twisting the camera wires to the exposed reverse light wires.
Once connected, wrap with electrical tape. Do not attempt this if you
are not knowledgeable with electrical installation practices.
-10-
15. Now stick the camera on the chosen location of the vehicle with
waterproof montage glue. Please read the instructions of the glue packing
carefully before you use it.
CAMERA WIRING DIAGRAM
The camera is equipped with Reverse Voltage Protection. If the camera
does not operate, please check that the Red wire is connected to positive
(+) and the Black wire is connected to negative(-).