8
Issues en Error log
If the device is not functioning properly or an error code is visible, please check the below Error log for further
information. If the issue is not mentioned in the below error log, please contact the Trebs customer service.
Error Code
Issue
Solution
E5
Filter cover is not fixed
correctly
Cut power supply make sure the
filter cover is fitted correctly on the
backside of the device.
E0
HEPA filter is not in place or
placed in device correctly
Cut power supply and make sure the
filter is fitted correctly in its position.
Review: Replacing the HEPA filter
E2
The dust sensor is damaged
Contact customer service for more
information and repair.
E11
The motor is overheated
and has shut down.
Unplug the 49100 and let it cool for
10 minutes. After 10 minutes plug
the 49100 back in and restart.
E1
The motor is blocked and
can not function properly.
Contact the Trebs service
deparment.
Содержание 49100
