Trebs 49100, Руководство пользователя

Страница: 7 / 58

7
CLEANING INSTRUCTIONS
Cleaning the Trebs 49100 Air purifier
1. Make sure the air purifier is turned off and unplugged before cleaning.
2. The outside of the air purifier can be cleaned with a soft, clean and dampened cloth.
3. The filtered air outlet and the filter cover can be cleaned with a small soft brush.
4. The inside of the air purifier can be cleaned with a soft, clean and dampened cloth. Always make sure not to
clean beyond the safety grills.
5. Do not wash the HEPA filter.
Cleaning and replacing the HEPA filter general information
The HEPA filter requires to be cleaned every 360 hours of operation and replaced after 2160 hours of operation.
The lifetime of the HEPA filter depends on the working conditions and air quality.
The Trebs 49100 has indicators which will alert signal when action is needed.
Following the steps below will keep your Air purifier in top condition.
Cleaning the HEPA filter
After 360 hours of operation the HEPA filter will require to be cleaned.
This will be indicated by the PRE-FILTER icon turning red.
To clean the HEPA filter:
1. Make sure the Air purifier is turned off and unplugged.
2. Open the filter cover and remove the HEPA filter by pulling the fabric handles on the HEPA filter.
3. Gently brush the dust on both the inside and outside of the HEPA filter with a soft brush.
Note that the HEPA filter can not be opened or washed.
4. After cleaning, slide the HEPA filter gently back into position while making sure the fabric handles are facing
outward and towards the filter cover.
5. Close the filter cover.
6. Press the PRE-FILTER button for 3 seconds to reset the timer.
Replacing the HEPA filter
After 2160 hours of cumulative operation the HEPA filter will have to be replaced.
This will be indicated by the HEPA RE-SET button turning red.
To replace the HEPA filter:
1. Make sure the Air purifier is turned off and unplugged.
2. Open the filter cover and remove the HEPA filter by pulling the fabric handles on the HEPA filter.
3. Discard the old HEPA filter properly to local regulations.
4. Make sure the new HEPA filter is unpacked and ready to use.
5. Slide the new HEPA filter gently into position while making sure the fabric handles are facing the backside of
the air purifier.
6. Close the filter cover.
7. Press and hold the HEPA RE-SET button for 3 seconds to reset the HEPA filter timer.