8
3
To ATTACH Umbrella Light: (sold separately)
Loosen the light adapter built into the umbrella runner by turning counter-clockwise
(Fig. 20). After loosening, pull down light adapter post (Fig. 21) to attach the
umbrella light (sold separately).
To OPEN and ATTACH Light:
Open the Treasure Garden umbrella light by holding firmly with one hand and then depress
the clamp release button with the other hand to release the clamp lock. Open up the light
and clasp around the light adapter post (Fig. 22). Snap to close (Fig. 23).
To REMOVE Light and CLOSE adapter:
Hold the umbrella light, depress the clamp release button to release the clamp lock.
Remove umbrella light and gently push up the light adapter post back into umbrella runner
and tighten turning clockwise (Fig. 20).
NOTE:
It is not necessary to remove light
to close umbrella.
(Fig. 20)
(Fig. 21)
(Fig. 22)
(Fig. 23)
Features
NOTE: REFER TO SEPARATE BASE-13 OR MOUNT KIT MANUAL
FOR BASE ASSEMBLY PRIOR TO PROCEEDING.
6mm
Hexagon
Wrench
2.5mm
Hexagon
Wrench
(Fig. 1)
(Fig. 2)
(Fig. 3)
S T E P 1
Umbrella Assembly
Two-persons recommended for team lift and to complete assembly.
With base cover in place or mount kit installed, insert the main frame onto the installed
rotating hub (Fig. 1) {align tilt lever with foot pedal}. Assembled in upright position, insert the
(2) bolts and (2) washers and tighten using 6mm hexagon wrench provided (Fig. 2). Install
the crank lift handle onto the mid-area of the main frame. Use the 2.5mm hexagon wrench
provided to lock in the small screw (Fig. 3).
REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO
OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.
Your umbrella is now ready to operate!
