background image

5085 Township Road 353 • Millersburg, OH 44654

www.americanbabyclassics.com

•  20 - Internal Tooth Lock Washers

•  8 - 4" Connector Bolts

•  8 - 23/4" Connector Bolts

•  8 - Flat Washers

•  8 - Hex Nuts

•  4 - Connector Caps

•  8 - 3/4" Connector Bolts

•  1 - 4mm Allen Wrench

•  1 - Assembly Instructions

    *Parts diagram on next page

American Baby

classics

Abigail Crib

Model #CR106

CAUTION: Any mattress used in this crib must be at least 27 1/4 inches 

by 51 5/8 inches with a thickness not exceeding 6 inches.

WARNING:

 Failure to follow these 

warnings and the assembly instructions could 

result in serious injury or death

.

WARNING:

 Infants can suffocate on soft 

bedding. Never add a pillow or comforter. Never place additional 

padding under an infant.

1.  Read all instructions before assembling crib. Keep instructions for further use.

2.  To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise 

advised by your physician

3. 

Strangulation Hazard: 

• Strings can cause strangulation! Do not place items with a string around a child's neck, such as hood strings or pacifier 
cords. Do not suspend strings over a crib or attach strings to toys. 
• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners. 
• DO NOT place crib near window where cords from blinds or drapes may strangle a child.

4. 

 

Fall Hazard:

 

• When child is able to pull to a standing position, set mattress to lowest position and remove bumper pads, large toys and 
other objects that could serve as steps for climbing out. 
• Stop using crib when child begins to climb out or reaches height of 35 inches (89 cm).

5.  Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges 

before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib 
if any parts are missing, damaged or broken. Contact American Baby Classics for replacement parts and instructional 
literature if needed. DO NOT substitute parts.

6.  Never use plastic shipping bags or plastic film as mattress covers because they can cause suffocation.
7.  Infants can suffocate in gaps between crib sides and a mattress that is too small. Use a mattress that is at least 27 1/4" x 

51 5/8" with a thickness not exceeding 6 inches.

8.  The mattress spring level should never be adjusted up and down while the baby is in the crib.  

Maintenance & Cleaning:

9.  • If the crib is to be stored, carefully package all original hardware to protect from loss or damage, and store all parts 

together. Articles with sharp edges or pointed ends shall be kept away from the crib. 
• Avoid the use of furniture polish or wax, or any cleaning agents that may be hazardous . Do not use strong detergents as 
they may be an irritant to the baby's skin. The surface with which the baby comes in contact with should be wiped clean 
using a damp cloth and a small amount of mild soap.

10.  The crib is intended as a sleeping place for infants and toddlers, not a cage for active children.
11.  Caution: Securely tighten all bolts and other fasteners. Rough use and excessive moving of the crib can cause the bolts to 

loosen. Periodically maintain bolts by checking them. Loose bolts will cause part failure and could present a safety hazard.

12.  If refinishing using non-toxic finish specified for children's products. Follow warnings on all products in a crib.

Содержание Abigail Crib

Страница 1: ...r reaches height of 35 inches 89 cm 5 Check this product for damaged hardware loose joints loose bolts or other fasteners missing parts or sharp edges before and after assembly and frequently during use Securely tighten loose bolts and other fasteners DO NOT use crib if any parts are missing damaged or broken Contact American Baby Classics for replacement parts and instructional literature if need...

Страница 2: ... 8 Hex Nuts 4 23 4 8 4 Connector Bolts 8 23 4 Connector Bolts Parts List 1 4mm Allen Wrench 3 4 8 3 4 Connector Bolts 20 Internal Tooth Lock Washers 8 Flat Washers 4 Connector Cap ...

Страница 3: ...with four 4 connector bolts with lock washers using allen wrench provided Connector bolts screw into metal inserts in ends of panels See Figure 2 Make sure panel is centered on posts Keep top of panel 1 16 lower than top of posts Turn bolts snug Do not overtighten Note Metal inserts on posts D need to be facing panel C Metal Inserts facing in Large Back Panel 1 Pc FIGURE 1 Long Post E B Long Post ...

Страница 4: ...ts D and E with eight 2 connector bolts with lock wash ers Attach connector bolts and Connector caps hand tighten in remaining holes as shown in Figure 3 ers Attach connector bolts and Connector caps hand tighten in remaining holes as shown in Figure 3 Caution Any mattress used in this crib must be at least 27 1 4 inches by 51 5 8 inches with a thickness not exceeding 6 inches 2 Connector Bolt Con...

Отзывы: