5
headphone jack on the side of the control h ousing.
The detector’s
internal speaker disconnects when you connect the headphone.
Listening Safely
z
Do not listen at extremely high vo lume levels. Extended high volume
listening can lead to permanent hearing loss.
z
Do not wear earph ones while operating yo ur detector nea r
high-traffic areas
OPERATION
This Metal Detector distinguishes between ferrous and nonferrous metals.
Ferrous metal includes iron, while non-ferrous metals such as gold, silver,
copper, platinum, aluminum, lead, and zinc.
1. POWER ON THE DETECTOR
Hold the det ector in a comfor table position, then rotate
VOLUME
away
from
OFF
to power on the detector.
2. TUNING
z
Rotate
VOLUME
to the 11 o’clock position.
z
Set
DISC
to its midpoint.
z
Hold the search coil about 1 feet awa y from the gr ound,
and slowly
rotate
TUNE
left and right
until the pointer on the view meter rests at
or near 0, then
press and
release the red button.
**NOTE** It is normal to have
a faint sound when detector meter is at "0". The sound will disappear when
the needle moves left (detecting junk metal) or get louder when moving right
(detecting more valuable metal).
