Traynor Custom Valve YCV4050, Руководство пользователя

Страница: 4 / 18

1
The Traynor YCV4050
Introduction
The Traynor YCV4050 is a professional all-tube guitar combo. It draws on the rich tradition of Traynor guitar amplifiers
and combines the best of vintage design combined with modern principles, manufacturing techniques, and technology.
Features
• 100% Designed and Manufactured in North America!
• All-tube design with two 6L6 and three 12AX7A Premium tubes.
• A Single 12-inch Celestion® Creamback speaker for great classic sound and performance.
• Using all plywood for the construction of the cabinet guarantees the durability and rigidity that made Traynor famous.
• Separate tone controls on each of the two channels (lead and clean) for flexibility.
• Classic Long-Style Accutronics® Reverb, with dual springs, for authentic vintage sound.
• External speaker jack for the ultimate in versatility.
• Traynor TFS-2B latching dual-footswitch, with 10-foot cable included.
• A special DC powered filament supply on preamp tubes ensures reduced hum.
• Fully regulated power supply ensures ultra low noise.
• The best warranty in the business: a 2-year unlimited, transferable
“even if you break it” warranty (valid in the USA and Canada only).
Channel 1
1. Input
Channel 1 is the lead/overdrive channel and is selected in one of two ways, via the Channel Select switch on the
control panel, or via the Channel Select button on the supplied footswitch* pedal. A Yellow LED located next to the
Channel 1 Volume control illuminates when Channel 1 is active.
*Note: Plugging in the footswitch deactivates the panel-mounted Channel and Boost controls.
2. Gain & Volume Controls
Channel 1 uses a Gain control in conjunction with a Volume control to control the amount of tube-based overdrive
and volume. The Gain control is used to adjust the amount of overdrive, while the Volume control allows you to set
the actual loudness of the amplifier.
3. Boost Switch
A boost circuit is included to help you achieve ‘a-bit-more’ overdrive for leads. The boost can be selected via the front
panel switch or through the supplied footswitch pedal. A Red LED illuminates to indicate when the boost is active.
4. Channel 1 Tone Controls
The Treble, Bass, and Middle tone controls are used to help you shape your sound. They are post-gain and pre-
volume. These are active only when Channel 1 is selected.
Gain
0
5
10 0
5
10 0
5
10 0
5
10 0
5
10 0
5
10 0
5
10 0
5
10 0
5
10 0
5
10 0
5
10
CHANNEL CHANNEL
SELECT SELECT
Vintage /
Modern
1 2
Volume Middle Bass Treble Volume Middle Bass Treble Reverb
Power
STANDBY STANDBY BRIGHTNESS BOOST
Input
Master
Volume
Send
EFX / Line Footswitch
Rtn
Ch. Select
/ Boost On
Extension
Speaker
Power
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • Toronto, CANADA
POWER
6L6B
V4
6L6B
V5
PREAMP SPLITTER
12AX7
V3
12AX7
V2
12AX7
V1
DÉBRANCHÉ L’APPAREIL AVANT
DE REMPLACER LES LAMPES
DISCONNECT POWER WHEN
REPLACING TUBES
FUSE: T2.0A
sloblo
230V
50Hz 0,5A
120VAC
60Hz 1.0A
YCV4050
A-Z356R / 1v1
FUSE: T800mA
CAUTION:
REPLACE FUSE
WITH SAME TYPE AND RATING
ATTENTION:
REMPLACER LE
FUSIBLE DU MEME TYPE ET DU
MEME COURANT NOMINAL
DISCONNECT POWER
BEFORE SERVICING!
DEBRANCHER L’APPAREIL AVANT
D’ENLEVER LES COUVERCLES!
THIS UNIT MUST BE GROUNDED!
CET APPAREIL DOIT ÊTRE MIS À LA TERRE!
Anniversary
TR TRAYNOR YCV4050 AYNOR YCV4050 TRAYNOR YCV4050
Valve Valve Custom Custom Valve Custom