www.traxontechnologies.com
©2020 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
IG0107EN V1.0 09/20
7 of 20
2.2 Pre-Installation Checks
2.2.1
Installation Checklist
1. Prepare cables and all necessary accessories (Waterproof Quick Lock End Caps etc).
2. Perform functional check of ARCHISHAPE
®
Tube Ultra Slim. Take care not to damage
cables/connectors during pre-installation checks.
3. Ensure all pre-installation checks laid out below have been followed.
4. Mount the ARCHISHAPE
®
Tube Ultra Slim on-site. If the installation is to be left
uncompleted overnight, place all non-connected LED Engines and ARCHISHAPE
®
Tube
Ultra Slim in an indoor environment.
Ensure all the Interconnection Cables, ARCHISHAPE
®
Tube Ultra Slim and LED Engines are
initially stored in a dry area to guarantee the complete sealing of the system from water before
installation.
2.2.2
Bracket
Screws are needed to fix the bracket. The schematic diagram of the bracket is as follows
FIG.5: ARCHISHAPE
®
Tube Ultra Slim
A
Tube Length
A
1000mm
660mm
500mm
160mm
300mm
80mm
2.2.3
Installation Sequence
1. Measure the correct distances for brackets.
2. Connect ARCHISHAPE
®
Tube Ultra Slim in the daisy-chain manner outlined in the System
Diagram to form large installations.
3. Perform functional check on all ARCHISHAPE
®
Tube Ultra Slim and inspect cables and
brackets for any damage. Check for any abnormalities with the control signal.
4. Report any functional defect found to your nearest Traxon Technologies office. DO NOT
attempt to install ARCHISHAPE
®
Tube Ultra Slim with functional defects on-site.
