Gas/Pellet Remote Thermostat
SKU 99300646
Page 7 of 8
11/11/09 - 17601251
© Travis Industries, Inc.
Auto Mode
Auto mode works like a
thermostat, turning the heater on
and off to meet the desired
temperature.
Auto
ROOM TEMP
°F
°F
SET TEMP
MIN
THERMOSTAT MODE:
Use this key to toggle the
thermostat mode. The
display will indicate
“AUTO” when in
thermostat mode.
TO ADJUST TARGET
TEMPERATURE:
Use the arrow keys to adjust the target
temperature to the desired level.
The heater will turn on and off to keep
the room temperature near the target
temperature.
IMPORTANT NOTES:
-- The thermostat has a delay to prevent
the heater from turning on and off
repeatedly. As a result, the target
temperature may be slightly higher (2°
or 3°) than the room temperature yet
the heater does not turn on – do not
adjust the target temperature – the
heater will turn on in a few minutes.
-- The thermostat is not intended for un-
attended use. If the thermostat calls for
heat for 6 hours continuously, it will shut
off and not turn on until reset.
HINT:
If your heater turns on
and off frequently, adjust
the flame height down
slightly for a more
consistent heat output.
TIMER
CLOCK
MANUAL
ON/
OFF
ON/
OFF
AU
TO
Timed Mode
Timed mode allows you to turn
the heater on for a pre-set period
of time.
ON
ROOM TEMP
°F
°F
SET TEMP
TIMER
MIN
The heater will turn on and
stay running for the number of
minutes displayed.
TIMED OPERATION:
a)
b)
c)
Use the arrow keys to adjust the
target temperature to 90°.
Press the “TIMER” button - the
“ - - -” will start to flash.
Use the arrow keys to set the
number of minutes you would like
the heater to stay on.
NOTE:
If the room exceeds 90°, the
heater will shut off.
TIMER
CLOCK
MANUAL
ON/
OFF
ON/
OFF
AU
TO
