manualshive.com logo in svg

Travis Industries GreenSmart Fireplace 564 SS, Руководство по установке

Поделиться
Скачать
Travis Industries GreenSmart Fireplace 564 SS Скачать руководство пользователя страница 33

 

Installation

  

(for qualified installers only)

 

33 

© Travis Industries 

4070620

 100-01199_000 

Thin Facing Installation (tile, marble, or other non-combustible under 25mm thick) 

 

Upgrade faces are available for this fireplace and may influence facing installation.  Consult with your 

Travis Dealer if you are using an upgrade face. 

 

Do not install tile (or other material)  
in front of the glass frame, 

convection channel, or access panel 

openings.  This area must remain 

open to access internal components 
and for convection air.

Raised Fireplaces:
Facing is installed 1” (maximum) 
above the base of the fireplace.

Facing is installed to this 
edge of the fireplace.

FRONT VIEW

Tile Line

Tile Line

Hearth Line

Tile Line

27-3/4”

1”

1-7/8”

32-1/2”

1-1/2”

NOTE FOR FPX FACES:
FPX arched faces require the FPX Face Upgrade 
Kit (sku 98500683) and a triangular piece of 
facing in these upper corners.  See the 
instructions included with the face for further 
details.

7-1/2”

1-5/8”

Fireplace

Drywall

Framing

Nailing Bracket

Tile

TOP VIEW

Drywall

Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth 1” (max.) above the  base of the 
fireplace.  The fireplace may be raised to 
accommodate thicker hearth materials.

Floor-Mounted Fireplaces or Raised Hearths:  
Build the hearth 25mm (max.) above the base of the 
fireplace.  The fireplace may be raised to 
accommodate thicker hearth materials. 

Raised Fireplaces: 
Facing is installed 25mm (maximum) 
above the base of the fireplace. 

38mm 

705mm 

25mm 

48mm 

825mm 

190mm 

42mm 

Содержание GreenSmart Fireplace 564 SS



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды