36
Operation
© Travis Industries
5/20/2021 - 1558
430 MF GSR2
Low Battery Indicator
Transmitter Batteries
The transmitter has a battery-level indicator. When it indicates low battery voltage (see
Figure 13
below), install
three new AAA alkaline batteries into the transmitter (see “
Transmitter Battery Installation
” on page
36).
Figure 13
IFC Batteries
The IFC (Integrated Fireplace Control) will “beep” twice when a transmitter button is pressed when the
batteries are low. Install four new AA alkaline batteries into the battery box when this occurs (see
“
Battery Installation
” on page 36). In applications where the appliance is required to provide heat,
we recommend replacing the batteries before each heating season.
Battery Replacement
Battery Installation
Install four AA batteries into the battery holder (see
Figure 14
below). These batteries act as a power
backup in case the household (AC) current goes out.
Transmitter Battery Installation
Install the three included AAA batteries into the remote.
Figure 14
Power Outages
The remote will work if the household current (AC power) is disconnected. The batteries inside the battery
box will continue to power the heater but the accent light(s) and blower will not operate.
