Travel Vision R7 80, Руководство пользователя

Страница: 9 / 61

page 9
3.5
Searching satellite
After connecting the wiring as described in section 3.4, switch on your satellite receiver and television. Then
connect the control module to the antenna system by pressing it firmly into its socket.
On the display of the control module the following will be then shown:
Before starting the satellite searching procedure we advise you to check whether the battery has
sufficient capacity.
The battery symbols [====] show the capacity of the battery.
[=]
Almost empty, see control module charging chapter 3.8
[==] You can search on average for 15-25 minutes
[===] You can search on average for 25-45 minutes
[====] You can search for up to 60 minutes
This last message will disappear after a few seconds, after which the system will present the satellite menu. Now
you can select the satellite of your choosing.
During its first usage, the system will preselect the Astra1 satellite. The system will store and remember
previously selected satellite(s) and will show it on the display after startup.
TRAVEL VISION
R7 RECREATION
FIRMWARE V****
BOOTING
ASTRA1 19.2° ∞
TURN LNB TO 0