page 17
7.3
Satellite found, but not all channels
Check if your subscription or smart cart is still valid.
7.4
Error during software update:
Repeat the software update procedure
7.5
Error during software update:
Check if the software has been correctly stored on the USB flash drive.
7.6
Error during software update:
Insert the USB flash drive once more.
7.7
Error messages: calibration failed, error azimuth adjustment, error elevation adjustment
Check that there are no obstructions which hinder the rotation or alignment of the dish. Remove the
control module from the antenna unit and reinsert it again.
7.8
No LNB signal:
Check if the F-connector to the LNB is connected and tightened.
Check if the LNB cable is damaged.
Contact your dealer.
7.9
Error E: OXBAFF
Fault in motor electronics. The control module requires repair, please contact your dealer.
E:ERROR DURING
UPGRADE
E:FIRMWARE NOT
FOUND
E:USB DISK NOT
FOUND
ERROR DURING
CALIBRATING
ERROR AZIMUTH
ADJUSTMENT
ERROR ELEVATION
ADJUSTMENT
NO LNB SIGNAL
E: OXBAFF
SEE MANUAL
Содержание R7 80
Страница 20: ...Page 20...
Страница 21: ...page 21...
Страница 41: ...page 41...
Страница 43: ...page 43...