How to Remove the Traction Belt
✔
Remove the belt protection (fig 3).
✔
Loosen the belt tension screw (fig. 4).
✔
Remove the belt from the front pulley of
the transmission unit.
✔
To remove the belt from the rear pulley,
slide the belt over the blade end (fig. 5).
✔
To assemble the traction belt, invert the
previous steps.
✔
Adjust the pulley tension by tightening the
tension screw.
✔
Replace the belt protection (fig. 3).
✔
Before you start moving the grass, make
sure the traction system and the mower
will stop properly. If the traction system
will not stop, take it to a TRAPP
authorized service store.
Attention!
Before removing the belt, disconnect
the spark plug wire.
Figure 3
Figure 4
Figure 5
Belt
protection
Belt
Belt
Transmission
pulley
Belt tension screw
ENGLISH
53
Содержание JT 55C
Страница 69: ...Notas Notas Notes...
Страница 70: ...Notas Notas Notes...