manualshive.com logo in svg

Tranzeo Wireless Technologies TR-Multi-2, Руководство пользователя

Поделиться
Скачать
Tranzeo Wireless Technologies TR-Multi-2 Скачать руководство пользователя страница 3

 

iiiiiiiii 
This document is intended for Public Distribution                         
19473 Fraser Way, 

Pitt Meadows, B.C. Canada V3Y  2V4

 

Safety Information 

iii  

TR-Multi Series

 

Tranzeo Wireless Technologies 

This device has been tested and found to comply with the limits for a Class B digital device 
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable 
protection against harmful interference when the device is operated in a residential 
environment. This device generates, uses, and can radiate radio frequency energy. If not 
installed and used in accordance with the user guide, may cause harmful interference to radio 
communication. In case of harmful interference, the users will be required to correct the 
interference at their own expense. 

 

The users should not modify or change this device without written approval from Tranzeo 
Wireless. Modification will void warranty and authority to use the device. 
 
For safety reasons, people should not work in a situation where RF exposure limits could be 
exceeded. To prevent this situation, the users should consider the following rules: 
 

• 

Install the antenna so that there is a minimum of 59 cm (23.23 in) of distance between 
the antenna and people. 

• 

Do not turn on power to the device while installing the antenna. 

• 

Do not connect the antenna while the device is in operation. 

• 

Do not collocate or operate the antenna used with the device in conjunction with any 
other antenna or transmitter. 

• 

Use this product only with the following Tranzeo antennas of the same or lower gain:  

 
TR-OD24-12 – 2.4 GHz 12 dBi dipole 
TR-24H-90-17 – 2.4 GHz 17 dBi sector 
TR-GD24-24 – 2.4 GHz 24 dBi grid 
TR-5X-ANT-24 – 5.8 GHz 24 dBi Patch antenna 
TR-5.8-32DB-ANT – 5.8 GHz 32 dBi Dish antenna 
TR-58H-90-16 – 5.8 GHz 16 dBi Sector antenna 
TR-HTQ-5.8-12 – 5.8 GHz 12 dBi Omni antenna 
 

• 

In order to ensure compliance with local regulations, the installer MUST enter the 
antenna gain at the time of installation. See Chapter 3, 

Wireless Settings

, for details. 

FCC Compliance 

Safety Information 

Содержание TR-Multi-2


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды