EMC GUIDANCE
Contact Information
Company:
For more information about our products, please visit www.transtekcorp.com. You can get
customer service, usual problems and customer download, Transtek will serve you anytime.
Manufactured by:
Address:
Guangdong Transtek Medical Electronics Co., Ltd.
Zone B, No.105, Dongli Road, Torch Development District,
Zhongshan, 528437, Guangdong, China
Guangdong Transtek Medical Electronics Co., Ltd.
A01
Internally Powered ME Equipment
IP22: The first number 2: Protected against solid foreign
REMHFWVRIPPɎDQGJUHDWHU7KHVHFRQGQXPEHU
Protected against vertically falling water drops when enclosure
titled up to 15º. Vertically falling drops shall have no harmful
effects when the enclosure is titled at any angle up to 15º on
either side of the vertical.
Mode of operation
Continuous operation
Degree of protection
Type BF applied part
IP Classification
WARNING: No modification of this equipment is allowed.
Software Version
Device Classification
SPECIFICATIONS
FCC STATEMENT
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
FCC ID: OU9TMB2085-K
