BEFORE YOU START
Setting the trends time
1
2
.Press the “START/STOP” button to confrim
the trends strat time, then set trends end time.
.When the monitor is off, press “MEM” button
to enter memory mode, press both “USER”
and “MEM” buttons at the same time,it will
display right picture, you could set the trends
start time, press “MEM” button will increase time,
press“USER” button will decrease time.
3
. After the trends start time and end time
are set, the LCD will disply “do nE” and
then it will turn off.
Select the User ID
Before you start the measurement, please select the desired user ID first.
When the monitor is off, hold press “START/STOP” button or press
“USER” button, the user ID will show. Then press “USER” button to
switch the user ID between user 1 and user 2.
1.
Press “START/STOP” button to confirm user ID (If no any operation
after two seconds), then the blood pressure will begin measure-
ment.
2.
BEFORE YOU START
12
13
