In order to get the best effect and protect your monitor,please use the
the right batteries and special power adapter which complies with local
safety standard.
• Open the battery cover.
• Install the batteries by matching
the correct polarity, as shown.
• Replace the battery cover.
Installing and Replacing the Batteries
CAUTION
CAUTION
Replace the batteries whenever the below happen
The display is dim.
The display does not light up
AC adaptor
The Choice of Power Supply
1
.Battery powered mode:
6VDC 4×AAA batteries
2
.AC adaptor powered mode:
(Please only use the recommended AC
adaptor model).
Please unplug the adaptor to depart from
the using utility power.
BEFORE YOU START
5V 1A
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
Monitor Components
List
1.Blood Pressure Monitor
(TMB-2079)
4.User manual
2.Cuff (Type BF applied part)
(22cm~32cm or 22cm~42cm,
22cm~45cm)
Component list of
pressure measuring
system
1 Cuff
2 Air pipe
3 PCBA
4 Pump
5 Valve
3. 4×AAA batteries
BATTERY COMPARTMENT
CUFF
AIR HOSE
AIR CONNECTOR PLUG
LCD DISPLAY
MEM BUTTON
START/STOP BUTTON
USER BUTTON
5. AC Adaptor
(BLJ06L060100P-V
BLJ06L060100P-S
BLJ06L060100P-B
BLJ06L060100P-U)
USB POWER SOCKET
INTRODUCTION
The
shows
8
9
