9
8
BEFORE YOU START
BEFORE YOU START
In order to get the best effect and protect your monitor,please use the right
battery and special power adaptor which complies with local safety standard.
•
Open the battery cover.
•
Install the batteries by matching
the correct polarity, as shown.
•
Replace the battery cover.
Installing and Replacing the Batteries
CAUTION
CAUTION
Replace the batteries whenever the below happens
The display is dim
The display does not light up.
The Choice of Power Supply
1
.Battery powered mode:
6VDC 4×AA batteries
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
Setting Date and Time.
1.
2.
It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be assigned to each record that is
stored in the memory. (The setting range of the year :2019—2059;
Time format:12H)
Press MEM or USER button to
change the [YEAR]. Each press
will increase/decrease the
numeral by one in a cycling
manner.
When the monitor is off, hold pressing START/STOP button
for 3 seconds to enter the mode for year setting.
2 .AC adaptor powered mode:
6V 1A
(Please only use the recommended AC
adaptor model).
Please unplug the adaptor to depart from
the using utility power.
AC adaptor
3.
Press START/STOP button to confirm [YEAR]. Then the monitor diverts to
[MONTH] and [DAY] setting.
The shows
