Transpak GENESIS HORI TP-502MH Скачать руководство пользователя страница 8

Страница: 8 / 117

-A3-

(5)

Maintenance

Turn off the power before removing either of the covers.

Use the correct tools and parts to repair the machine.

The heater tongue is very hot; do not touch it.

(6)

Storage

The store room must be dry.

Do not expose the machine to extreme cold or hot environment.

Place the machine on an even floor in order to avoid any distortion.

(7)

Other Reminders

An operation manual must remain attached to the machine at all times.

Do not alter the equipment or circuitry unless authorized to do so by the manufacturer.

Do not operate the machine with the covers removed.

Never put any part of your body near, under or into a moving machine.

Do not overload the machine by exceeding the performance limitations specified in this

manual.

Содержание GENESIS HORI TP-502MH






















































































































Результаты поиска

Содержание GENESIS HORI TP-502MH

Отзывы:

Transpak GENESIS HORI TP-502MH, Руководство по эксплуатации, безопасности и запасным частям, Страница: 8 / 117

Результаты поиска

Содержание GENESIS HORI TP-502MH

Отзывы: