Transpak GENESIS HORI TP-502MH, Руководство по эксплуатации, безопасности и запасным частям, Страница: 31 / 117

-A26-
(2) How to Charge the Battery
a. Turn off power from the machine or unplug machine power cord from UPS socket
。
b. Unplug the wire connector B and I
。
c. Plug wire connector C with B firmly
d. Plug the input power cord of UPS to the socket.
e. LED in charger indicates battery status when charging.
i. When LED indicates Red, which means battery is under charging.
ii. When LED indicates Green, which means battery charge is completed and it is
under floating charge mode. Please unplug power cord, and the machine is ready
for use.
f. It takes around 4 hours for charging.
Note the following points while charging:
i. Avoid water and direct sun light.
ii. Make sure it's situated somewhere ventilating.
iii. Stay away from fire.
iv. Avoid high-temperature environment. The temperature of the battery shouldn't be
higher than 50
℃
.
v. Charging at flat surface. Avoid positing it on slope.
vi. Avoid shock and dust.
vii. Prevent short between positive pole and negative pole of the battery.
B
I
B
C